Trenching and boring are both professional excavation techniques. They are used in different circumstances depending on what kind of work needs to be done, and what the ground situation is. Let’s look closer at these two techniques.

What is Trenching?

Trenching is a simple excavation technique. A trench is usually dug from above in a path that is deeper than it is wide. While you could dig a basic trench with a shovel, on construction sites they typically use a trencher. Trenches vary widely in size, some of them only 18 inches deep while others can be 60 inches. The trenchers that dig them also differ in size. Some of them are the size of a lawnmower while others are more like a large tractor. for more info visit www.atbservices.com.au

When is Trenching The Answer?

A trench is a great solution when it doesn’t matter if the ground is disturbed. It needs to be an open area without underground utilities nearby to worry about. They commonly use this technique for laying pipes or cables.

What is Directional Boring?

While trenching is done when the ground is open and clear, directional boring is a less invasive technique. The boring rig will drill into the ground and create a tunnel where pipes or cables can be placed.

When is Directional Boring the Answer?

A boring rig can be the solution you need for a job involving landscaped yards or another area where it is important to minimize the damage to the ground. If digging a large trench through the area sounds like a bad idea, directional boring may be the best option.

Is Trenching or Boring Cheaper?

While boring is more expensive per foot than trenching, the costs of a trench need to be factored in. If you have to destroy a driveway or patio, boring might be the cheaper option overall.

Read Moving Tips Here

Leave a Reply

Your email address will not be published. Required fields are marked *